MFPCR

• Mini Pleat filter panel for the separation of suspended particles such as aerosols, toxic dusts, viruses, bacteria from the supply and extract air in cleanroom facilities with controlled air cleanliness and airflow.
• Particulate filter: Final filter for the most critical requirements of air cleanliness and sterility in areas such as production, research, medicine, pharmaceuticals industry, and nuclear engineering, etc.
• Use as a particulate filter: main or final filter (filter groups EPA, HEPA and ULPA)
• Use as a pre-filter: separation of particulate matter (filter groups ISO ePM10, ISO ePM2.5, ISO ePM1)

Special characteristics

• Optimal pleat geometry of the filter medium
• Low-turbulence outflow of clean air
• Leakage test using the scan test as proof of leak-tightness and as assurance for compliance with separation efficiency and pressure loss (standard from H14).

• Hygiene Conformity

Nominal sizes

• B x H x T [mm]

• ePM 10 according to DIN EN ISO 16890
• ePM 1 according to DIN EN ISO 16890
• EPA according to DIN EN 1822
• HEPA according to DIN EN 1822
• ULPA according to DIN EN 1822

Filter classes

• ePM10
• ePM 1
• E11
• H13
• H14
• U15
• U16

• FT: pleat depth
• CSU: continuous seal on the upstream side
• CSD: continuous seal on the downstream side
• CSB: continuous seal on both sides
• FNU: flat seal on the upstream side
• FND: flat seal on the downstream side
• FNB: flat seal on both sides
• GPU: Fluid seal (only for ALV, ALU, ALQ, ALT, ALH)
• TGU: test groove seal on the upstream side (only for filter classes H13, H14)
• PU: protection grid on the upstream side
• PD: protection grid on the downstream side
• PB: protection grid on both sides
• OT: oil mist test (only for filter classes H13, H14)
• OTC: oil mist test with certificate (only for filter classes H13, H14)
• ST: Scan test
• LFU: full-surface laminar fleece on the upstream side
• LFD: full-surface laminar fleece on the downstream side
• LFS: laminar fleece strips

Construction

Frame versions made from extruded aluminium sections

List of frame depths according to construction:

• ALD: 66 mm
• ALB: 69 mm
• ALC: 78 mm
• ALG: 90 mm
• ALF: 110 mm
• ALJ: 115 mm

Profiles for continuous seal/flat seal

• ALN: 30 mm
• ALZ: 78 mm
• ALY: 150 mm
• Profiles for fluid seal
• ALV: 85 mm
• ALU: 91 mm
• ALQ: 105 mm
• ALT: 130 mm
• ALH: 130 mm

• ALL: 94 mm
• ALS: 105 mm
• ALR: 109 mm
• ALX: 134 mm

• Filter media made of high-quality, wet-strength glass fibre papers, pleated
• Spacers made of thermoplastic hot-melt adhesive provide a uniform spacing of the pleats
• Joint sealing compound made of permanently elastic twocomponent polyurethane adhesive
• Frame made from extruded aluminium sections

• Testing of particulate filters according to DIN EN 1822-1 and DIN EN ISO 29463-2 – DIN EN ISO 29463-5 (EPA, HEPA, and ULPA particulate filters): Standards for testing filtration performance at the manufacturing plant, based on particle counting methods using a liquid test aerosol
• Testing in accordance with DIN EN ISO 16890; international standard: air filters for general ventilation. Classification of fractional efficiency based on the measured fractional efficiency which is processed into a reporting system for the particulate matter efficiency (ePM)
• For fine dust filters, the fractional efficiency of a certain size range is determined by aerosols (DEHS and KCl)
• Depending on the test values, the filters are classified into the filter groups ISO ePM10 and ISO ePM1
• Uniform classification of particulate filters according to separation efficiency, using a test aerosol with a mean particle size at the minimum efficiency point (MPPS)
• Particulate filters are classified as EPA (filter classes E10, E11 and E12), HEPA (filter classes H13 and H14) or ULPA (filter classes U15, U16 and U17) according to the measured values for local and overall separation efficiency
• Hygiene compliance: VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6021 and ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3, and EN 16798

• RoHS EU Directive 2011/65/EU (RoHS)
• This product or single variants comply with EU Directive 2011/65/EU (RoHS) on the restriction of the use of certain hazardous substances in electrical and electronic equipment. For more information, please refer to our Environmental Product Declarations.
• REACH 1907/2006 (EC Regulation REACH)
• This product or single variants comply with the provisions of EC Regulation No. 1907/2006, also known as REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals). For more information, please refer to our Environmental Product Declarations.