MFP-introduction-image

VDI6022_gs_01ai.png
Tested to VDI 6022

Conforms to VDI 6022

label-ECC-air-filters_MFEjpg.jpg
MFP-introduction-image
VDI6022_gs_01ai.png
label-ECC-air-filters_MFEjpg.jpg

MFP  

FOR THE MOST DEMANDING REQUIREMENTS OF AIR CLEANLINESS AND STERILITY


Prefilters or final filters for the separation of fine dust and suspended particles. Used for industrial, research, medical, pharmaceutical, and nuclear engineering applications.

  • Filter classes ISO ePM10, ISO ePM1 (fine dust filter) and EPA, HEPA (particulate filter)
  •  Performance characteristics tested in accordance with DIN EN ISO 16890 or DIN EN 1822-1 and DIN EN ISO 29463-2 to DIN EN ISO 29463-5
  •  Eurovent Certification for fine dust filters
  •  Meets the hygiene requirements of VDI 6022
  •  Filter media for special requirements, glass fibre papers with spacers made of thermoplastic hot-melt adhesive
  •  Low initial differential pressure due to ideal pleat position and largest possible filter area
  •  Perfect adjustment to individual requirements due to different pleat depths, filter frame made of various materials
  •  Fitting into ceiling mounted or wall mounted particulate filters (Types TFC, TFW, TFM, TFP), ducted particulate filters (Types KSF, KSFS) or duct casings for particulate filters (Type DCA)
  •  Automatic filter scan test for all filters from filter class H14

 

 


General information

Application
  • Mini Pleat filter panel for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems with large volume flows and long filter lives
  • Fine dust filter: prefilter or final filter for the separation of fine dust in ventilation and air conditioning systems.
  • Particulate filter: main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, medicine, etc.

Special characteristics

  • Leakage test is standard for all particulate filters of classes H13, H14

Classification

  • Eurovent Certification for fine dust filters

Nominal sizes

B × H × D [mm]

Options
  • FT: pleat depth
  • PU: protection grid on the upstream side
  • PD: protection grid on the downstream side
  • PB: protection grid on both sides
  • FNU: flat profile seal on the upstream side
  • FND: flat profile seal on the downstream side
  • FNB: flat seal on both sides
  • TGU: test groove seal on the upstream side (only for filter classes H13, H14)
  • CSU: continuous seal on the upstream side
  • CSD: continuous seal on the downstream side
  • CSB: continuous seal on both sides
  • WS: without seal
  • OT: oil mist test (only for filter classes H13, H14)
  • OTC: oil mist test with certificate (only for filter classes H13, H14)
  • ST: filter scan test (only for filter classes H13, H14)

Construction
  • PLA: frame made of plastic (depth 48, 96, and 150 mm)
  • MDFF: frame made of MDF, with top frame (depth 60 mm)
  • MDF: frame made of MDF (depth 60, 78, 150, and 292 mm)
  • GAL: frame made of galvanised steel (depth 48, 60, 96, 150 and 292 mm)
  • STA: frame made of stainless steel (depth 48, 60, 96, 150 and 292 mm)
  • CBS cardboard frame, stapled (depth 45, 48, 90 and 96 mm)

Useful additions
  • Filter wall (SIF)
  • Universal casing (UCA)
  • Ducted particulate filter, available as one unit (KSF, KSFS) or as a filter unit system (KSFSSP)
  • Duct casing for particulate filters (DCA)
  • Ceiling mounted particulate filter (TFC)
  • Wall mounted particulate filter (TFW)
  • Particulate filter module (TFM)
  • Ceiling diffusers for extract air applications (TFEA)

Construction features
  • Circumferential flat seal on the upstream side for variants CBS, MDF, GAL, STA
  • Variants optionally with foamed continuous seal or with a test groove seal (filter classes H13, H14) on the upstream side
    • The flat seal or continuous seal can also be arranged on the downstream side or on both sides
  • Protection grid made of expanded metal: can be fitted on the downstream or upstream side or both sides as required

Materials and surfaces
  • Filter media made of high-quality, wet-strength glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic twocomponent polyurethane adhesive
  • Frame optionally available in cardboard, plastic, fibreboard, galvanised sheet steel, stainless steel

Standards and guidelines
  • Tested according to ISO 16890; international standard for general ventilation and air conditioning; classification of fractional efficiency based on the measured fractional separation efficiency which is processed into a reporting system for the fine dust fractional efficiency (ePM)
  • For fine dust filters, the fractional separation efficiency of a certain size range is determined by aerosols (DEHS and KCl)
  • Depending on the test values, the filters are classified into filter groups ISO ePM10 and ISO ePM1
  • Testing of particulate filters according to EN 1822-1 and ISO 29463-2 to ISO 29463-5 (EPA, HEPA and ULPA particulate filters): standards for testing the filtration performance in the factory, based on particle counting methods using a liquid test aerosol.
  • Uniform classification of particulate filters according to separation efficiency, using a test aerosol with an average particle size within the minimum separation efficiency (MPPS)
  • Classification of particulate filters:
    • Determined local separation efficiency
    • Determined integral separation efficiency
  • Filter classes:
    • EPA: Filter classes: E10, E11, E12
    • HEPA: Filter classes: H13, H14

Tehničke informacije

  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE

Fractional efficiency ePM10 [%] according to ISO 16890

55

Fractional efficiency ePM1 [%] according to ISO 16890

65

90

Initial differential pressure [Pa] at nominal volume flow rate

90

110

150

Final differential pressure [Pa]

450

450

450

Maximum operating temperature [°C]

80

80

80

Maximum relative humidity [%]

100

100

100


Filter class according to DIN EN 1822

E11

H13

H14

Separation efficiency [%] according to EN 1822

> 95

> 99.95

> 99.995

Initial differential pressure [Pa] at nominal volume flow rate

125

250

120/140

Final differential pressure [Pa]

300

600

300

Maximum operating temperature [°C]

80

80

80

Maximum relative humidity [%]

100

100

100

This specification text describes the general characteristics of the product. Texts for variants can be generated with our Easy Product Finder design programme.

Specification text
Mini pleat filter panels MFP for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. Used as fine dust filters, prefilters or final filters in ventilation and air conditioning systems; or as particulate filters, main or final filters for highest requirements of air cleanliness and sterility, in areas such as industry, research, medicine, pharmaceuticals, and nuclear technology. Low installation depth due to compact construction, for systems with high volume flows and long filter lives. Filter media made of high-quality, wet-strength glass fibre papers with spacers made of thermoplastic hot-melt adhesive. Ideal pleat position and largest possible filter area allow for low initial differential pressures. Mini-Pleat filter panels available in standard and special sizes, in variable pleat depths, filter groups ISO ePM10, ISO ePM2.5, ISO ePM1 (fine dust filters) and EPA, HEPA, ULPA (particulate filters). Depending on the frame design, Mini Pleat filter panels are fitted as standard without seal or with a flat seal on the upstream side. Variants are optionally available with foamed continuous seal on one or both sides, with test groove seal on the upstream side or with protection grid, positioned as required. Mini Pleat filter panels used as fine dust filters are certified by Eurovent.

Special features

  • Leakage test is standard for all particulate filters of classes H13, H14

Materials and surfaces
  • Filter media made of high-quality, wet-strength glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic twocomponent polyurethane adhesive
  • Frame optionally available in cardboard, plastic, fibreboard, galvanised sheet steel, stainless steel

Construction
  • PLA: frame made of plastic (depth 48, 96, and 150 mm)
  • MDFF: frame made of MDF, with top frame (depth 60 mm)
  • MDF: frame made of MDF (depth 60, 78, 150, and 292 mm)
  • GAL: frame made of galvanised steel (depth 48, 60, 96, 150 and 292 mm)
  • STA: frame made of stainless steel (depth 48, 60, 96, 150 and 292 mm)
  • CBS cardboard frame, stapled (depth 45, 48, 90 and 96 mm)

Sizing data
  • Filter group [DIN EN ISO 16890]
  • Separation efficiency [%]
  • Filter class [DIN EN 1822]
  • Volume flow [m³/h]
  • Initial differential pressure [Pa]
  • Nominal size [mm]

Life cycle assessment

A life cycle assessment is available for the product type in the form of an environmental product declaration (EPD), which has been checked and published by a programme holder.

MFPH13MDF/610 × 610 × 78×50/PD/FNU/ST
|||||||||
123456789
1 Type
MFP
Mini Pleat filter panel

2 Filter class
ePM1
Fractional efficiency ePM1 [%] according to ISO 16890
ePM10 Fractional efficiency ePM10 [%] according to ISO 16890
E11 Filter class E11 according to EN 1822
H13 Filter class H13 according to EN 1822
H14 Filter class H14 according to EN 1822

3 Separation efficiency

Only with filter class ePM1, ePM10
Specify separation efficiency [%] according to ISO 16890

4 Construction

CBS Cardboard frame, stapled

PLA Plastic frame

PLAF Frame made of plastic with flange (25 mm)

MDF Frame made of medium density fibreboard

MDFF Frame made of medium density fibreboard, with top frame

GAL Frame made of galvanised sheet steel

STA Frame made of stainless steel

5 Nominal size [mm]
Specify width × height × depth

6 Pleat depth [mm]

Specify pleat depth

7 Protection grid

No entry: without protection grid

PU Protection grid on the upstream side

PD Protection grid on the downstream side (with construction

ALN as standard)

PB Protection grid on both sides

8 Seal
WS
without seal
FNU Flat seal on the upstream side
FND Flat seal on the downstream side
FNB Flat seal on both sides
TGU Test groove seal on the upstream side
CSU Continuous seal on the upstream side
CSD Continuous seal on the downstream side
CSB Continuous seal on both sides

9 Testing
No entry: no leakage test
OT Oil mist test (filter classes H13 and H14 only)
OTC Oil mist test with certificate (filter classes H13 and H14 only)
ST Filter scan test (only with filter class H13, H14)


Order example: MFP-H13-MDF/610×610×78×50/PD/FNU/ST

TypeMFP
Filter classFilter class H13 according to EN 1822
Separation efficiency-
ConstructionFrame made of MDF
Nominal size ´[mm]Width 610, height 610, depth 78
Pleat depth [mm]50
Protection gridProtection grid on the downstream side
SealFlat seal on the upstream side
Testingscan test

Učitavanje

Informacije o proizvodu

Sertifikati

Uputstva za rukovanje

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Podeli stranicu

Preporuči ovu stranicu

Preporuči ovu stranicu slanjem linka putem email poruke.

Polja označena sa (*) su obavezna polja.

Podeli stranicu

Zahvaljujemo se na Vašoj preporuci!

Vaša preporuka je poslata i biće uskoro isporučena.

Kontakt

Tu smo za vas

Molimo Vas da navedete sadržinu poruke i vrstu zahteva
Tel.: +381 11 2622 543 | Fax: +49 (0)2845/202-265

Polja označena sa (*) su obavezna polja.

Kontakt

Zahvaljujemo na vašoj poruci!

Vaša poruka je poslata i biće uskoro obrađena.
Naše odeljenje za servisnu podršku će Vas kontaktirati u najkraćem roku.
Za opšta pitanja u vezi proizvoda ili usluga možete takoše da pozovete:
Tel.: +381 11 2622 543 | Fax: +381 11 2624 150

Kontakt

Tu smo za vas

Molimo Vas da navedete sadržinu poruke i vrstu zahteva
Tel.: +381 11 2622 543 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Polja označena sa (*) su obavezna polja.

Kontakt

Zahvaljujemo na vašoj poruci!

Vaša poruka je poslata i biće uskoro obrađena.
Naše odeljenje za servisnu podršku će Vas kontaktirati u najkraćem roku.
Za opšta pitanja u vezi proizvoda ili usluga možete takoše da pozovete:
Tel.: +381 11 2622 543 | Fax: +381 11 2624 150