Nominal sizes
Variants
Actuator
Parts and characteristics
Useful additions
Construction features
Material and surfaces
Fixed
Standards and guidelines
Maintenance
DUK
Functional description
Jet nozzles allow for supply air distribution over long distances. The airflow direction is adopted to the heating and cooling mode by adjusting the discharge angle. The supply air to room air temperature difference may range from -12 – +20 K.
Cooling mode
Cooling mode is carried out with a positive discharge angle of up to 30°. The supply air jet is directed towards the ceiling, but is deflected towards the floor as the distance from the jet nozzle increases, due to the higher density of the cooled air. When the supply air jet reaches the occupied zone, both supply air to room air temperature difference and airflow velocity have been reduced to comfortable levels. This principle of operation allows for long throw distances.
Heating mode
Heating operation is carried out with a negative discharge angle of up to 30°. The supply air jet is directed towards the occupied zone. The lower density of the warm air causes the supply air jet to become buoyant. Ideally, the supply air jet reaches the occupied zone with a low supply air to room air temperature difference and airflow velocity. The discharge angle can be changed manually or with an electric actuator.
DUK-F
Functional description
Jet nozzles allow for supply air distribution over long distances. Fixed jet nozzles can be used for heating and cooling mode. The supply air to room air temperature difference may range from -12 – +20 K.
Cooling mode
Due to the higher density of the cooled air, the horizontal supply air jet is directed towards the floor with increasing distance from the jet nozzle. When the supply air jet reaches the occupied zone, both supply air to room air temperature difference and airflow velocity have been reduced to comfortable levels.
Heating mode
The supply air is discharged horizontally, but due to the lower density of warm air the supply air jet becomes buoyant. Ideally, the supply air jet reaches the occupied zone with a low supply air to room air temperature difference and airflow velocity.
Nominal sizes | 100, 125, 160, 200, 250, 315, 400 mm |
Volume flow rate range | 15 – 400 l/s or 54 – 1440 m³/h |
adjustable discharge angle | –30 to +30° |
Supply air to room air temperature difference | –12 to +20 K |
This specification text describes the general characteristics of the product. Texts for variants can be generated with our Easy Product Finder design programme.
Fixed and adjustable jet nozzles for the ventilation of large internal spaces such as halls and assembly rooms. Air discharge with long throw distance and optimal acoustic properties. For horizontal air discharge; variants with fixed discharge angle, adjustable air discharge (360°), or with a vertical swivelling range of –30 and +30°. Fixed nozzles with acoustically optimised contours and countersunk holes for screw-fixing to a plane surface. Adjustable jet nozzles include a spherical nozzle casing and a casing with a spigot, flanged collar or saddle connector. For push fitting directly onto circular ducts (duct connection) or as a direct branch off circular or rectangular ducts; also for installation on plane surfaces.
Special characteristicsMaterial and surfaces
Fixed
Sizing data
air-regenerated noise
DUK | – | V | – | R | – | E1 | / | 250 | × | 630 | / | P1 - RAL 9016 |
| | | | | | | | | | | | | | ||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 |
Order example: DUK-V-R-E1/250×630/P1-RAL9016
Type | DUK |
Air discharge direction | adjustable |
Connection | saddle connector |
Adjustment | 230 V AC, 3-point |
Nominal size [mm] | 250 |
Circular duct diameter [mm] | 630 |
Exposed surface | Powder-coated, RAL 9016 (traffic white) |
Podeli stranicu
Preporuči ovu stranicu
Preporuči ovu stranicu slanjem linka putem email poruke.
Podeli stranicu
Zahvaljujemo se na Vašoj preporuci!
Vaša preporuka je poslata i biće uskoro isporučena.
Kontakt
Tu smo za vas
Molimo Vas da navedete sadržinu poruke i vrstu zahteva
Tel.: +381 11 2622 543 | Fax: +49 (0)2845/202-265
Kontakt
Zahvaljujemo na vašoj poruci!
Vaša poruka je poslata i biće uskoro obrađena.
Naše odeljenje za servisnu podršku će Vas kontaktirati u najkraćem roku.
Za opšta pitanja u vezi proizvoda ili usluga možete takoše da pozovete:
Tel.: +381 11 2622 543 | Fax: +381 11 2624 150
Kontakt
Tu smo za vas
Molimo Vas da navedete sadržinu poruke i vrstu zahteva
Tel.: +381 11 2622 543 | Fax: +49 (0)2845/202-265
Kontakt
Zahvaljujemo na vašoj poruci!
Vaša poruka je poslata i biće uskoro obrađena.
Naše odeljenje za servisnu podršku će Vas kontaktirati u najkraćem roku.
Za opšta pitanja u vezi proizvoda ili usluga možete takoše da pozovete:
Tel.: +381 11 2622 543 | Fax: +381 11 2624 150